3Com 3C780 User Guide - Page 65
must recon them, as detailed below
![]() |
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installing the Hub 2-25 The default configuration of the attachment ports (the two leftmost ports on the module installed in slot 1) is B/A. If the attachment ports have been configured differently (as shown by the ATTACH LEDs on the management module), you must reconfigure them, as detailed below: 1. Configure the attachment ports as B and A. Type: set attach This selection prompt appears: Select one of the following: 1. B/A 2. S/M 3. M/M Attachment port configuration? 2. Select the attachment port configuration that you want. For example, type: 1 [Enter] These confirmation lines appear: Current configuration: M/M Initialize attachment as: B/A 3. Reset the hub by pressing the recessed RESET button on the management module front panel. The attachment ports will be initialized as B/A.
![](/manual_guide/products/3com-3c780-user-guide-1cbee3e/65.png)