3Com 3C780 User Guide - Page 108
The PMD Physical Layer Medium Dependent protocol defines the medium
![]() |
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5-6 Using the Hub The Station Management (SMT) acronyms and other line items used in the show ports display are defined below along with the values that may appear. Module Designation The first line in the show ports display gives the slot number of the module represented by the display and the number of modules installed in the hub. These combinations are possible: s 1 of 1 one module installed; display describes module in slot 1 s 1 of 2 two modules installed; display describes module in slot 1 s 1 of 3 three modules installed; display describes module in slot 1 s 2 of 2 two modules installed; display describes module in slot 2 s 2 of 3 three modules installed; display describes module in slot 2 s 3 of 3 three modules installed; display describes module in slot 3 PMD Class The PMD (Physical Layer Medium Dependent) protocol defines the medium that provides the physical link between two adjacent FDDI stations. Table 5-3 lists and defines the port media types for the PMD Class line in Figure 5-7. Table 5-3. Port Media Types Medium Definition Fiber 62.5 micron multimode fiber STP Shielded twisted pair UTP Unshielded twisted pair LCF Low-cost fiber N/S Not specified Unknown Unknown connecting medium Sonet Synchronous optical network
![](/manual_guide/products/3com-3c780-user-guide-1cbee3e/108.png)