3Com 3C780 User Guide - Page 46
Hub Chassis, Media Port Modules
![]() |
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2-6 Installing the Hub If you ordered a fiber media module, four small packets of fiber port module keys will be included with the module. For information on installing these keys, see the section "Keys for Fiber Port Modules" later in this chapter. If you ordered an STP media port module, one cascade connector will be shipped with the module. For information about the cascade connector, refer to the section "STP Cascade Connector" later in this chapter. NOTE: Remember to fill out the Product Registration Card at the back of this manual and return it to 3Com, or call 1-800-NET-3Com for immediate registration. Hub Chassis The LinkBuilder FDDI hub is shipped with no modules installed; the modules you ordered are shipped separately and packaged individually. The hub is shipped with two blanking plates attached over slots 2 and 3. Install the management module in slot 0. Install one of the media port modules in slot 1. To install additional modules, remove the blanking plates and insert the modules. Retain the blanking plates for possible future use when modules are removed. (Refer to the section "Installing Modules" later in this chapter for complete information about mounting the modules in the hub.) Media Port Modules Depending on your order, you should also have received one or more of the following modules: s LinkBuilder FDDI 4-port fiber port module s LinkBuilder FDDI 6-port STP port module s LinkBuilder FDDI 8-port UTP port module
![](/manual_guide/products/3com-3c780-user-guide-1cbee3e/46.png)