3Com 3C780 User Guide - Page 79
Port Connections
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuring the Hub 3-11 Returning to the Management Console Command Mode To return to the management console command mode without reattempting to enter the primitive console command mode, follow these steps: 1. Press [Enter]. This message appears: 3Com LinkBuilder® FDDI Workgroup Hub The password prompt appears. 2. Enter the password and press [Enter]. To return to the management console command mode from the primitive console command mode, reset the hub. Port Connections The two leftmost ports on any module installed in slot 1 serve as attachment ports. You can configure these ports to be any of the following: s B/A (dual attachment) s S/M (slave/master) s M/M (master/master) The way you configure these ports determines the type of attachment supported by the hub. The configurable attachment types are as follows: s Dual attachment s Dual homing attachment s Single attachment s Null attachment Table 3-2 shows how to configure the attachment ports for the desired attachment type.