3Com 3CBLSF50 User Guide - Page 95

ipSetup, If a default gateway is con d manually,

Get 3Com 3CBLSF50 - Baseline Switch 2250 PDF manuals and user guides
UPC - 662705529103
View all 3Com 3CBLSF50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

ipSetup The ipSetup command allows the user to define an IP address on the device either manually or via a DHCP server. Syntax ipSetup Default Configuration No default IP address is defined for interfaces. User Guidelines When the IP address is configured manually by the user, the address must be in the range 0.0.0.0 through 223.255.255.255. IP Addresses configured beyond the range of 224.0.0.0 are defined as multicast, experimental or broadcast addresses. If a default gateway is configured manually, the IP-address and mask are required to be the same as the gateway-address and mask. CLI Commands 95 Example The following example displays an IP address configured manually: Select menu option: ipSetup Enter configuration method (auto,manual)[auto]: manual Enter IP Address 192.168.1.1 [0.0.0.0 ]: Enter Subnet Mask 255.255.255.0 [255.255.0.0 ]: Enter Default Gateway [192.168.1.254 ]: Select management VLAN ID (1)[1]: This operation may take up to 30 seconds. Select menu option: The following example displays an IP address obtained via a DHCP server: Select menu option: ipSetup Enter configuration method (auto,manual)[manual]: auto Select management VLAN ID (1)[1]: This operation may take up to 30 seconds. Select menu option:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
CLI Commands
95
ipSetup
The
ipSetup
command allows the user to define an IP
address on the device either manually or via a DHCP
server.
Syntax
ipSetup
Default Configuration
No default IP address is defined for interfaces.
User Guidelines
When the IP address is configured manually by the user,
the address must be in the range 0.0.0.0 through
223.255.255.255.
IP Addresses configured beyond the range of 224.0.0.0
are defined as multicast, experimental or broadcast
addresses.
If a default gateway is configured manually, the
IP-address and mask are required to be the same as the
gateway-address and mask.
Example
The following example displays an IP address configured
manually:
The following example displays an IP address obtained
via a DHCP server:
Select menu option:
ipSetup
Enter configuration method (auto,manual)[auto]:
manual
Enter IP Address
[0.0.0.0
]:
192.168.1.1
Enter Subnet Mask
[255.255.0.0
]:
255.255.255.0
Enter Default Gateway
[192.168.1.254
]:
Select management VLAN ID (1)[1]:
This operation may take up to 30 seconds.
Select menu option:
Select menu option:
ipSetup
Enter configuration method (auto,manual)[manual]:
auto
Select management VLAN ID (1)[1]:
This operation may take up to 30 seconds.
Select menu option: