3Com 5500G-EI Command Reference Guide - Page 151

Routing Table Display Commands 151 Age: 3:47 Cost: 0/0 For detailed description of output information, refer to Table 18. display ip routing-table ip_address1 ip_address2 Syntax display ip routing-table ip_address1 mask1 ip_address2 mask2 [ verbose ] View All views Parameters ip_address1 mask1 Enter the destination IP address and subnet mask that you want to start the address range. This command displays the route for your chosen address range. The subnet mask can be entered as either a dotted decimal notation (x.x.x.x), or an an integer in the range 0 to 32. ip_address2 mask2 Enter the IP address and subnet mask that you want to end the address range. The subnet mask can be entered as either a dotted decimal notation (x.x.x.x), or an an integer in the range 0 to 32. verbose Enter to display the verbose information of both the active and inactive routes. Without this parameter, the command only displays a summary of active routes. Optional. Description Use the display ip routing-table ip_address1 mask1 ip_address2 mask2 command to view the route information for the specified address range. Example To display the routing information of destination addresses ranging from 1.1.1.0 to 2.2.2.0., with a subnet mask of 24, enter the following: display ip routing-table 1.1.1.0 24 2.2.2.0 24 The information displays in the following format: Routing tables: Summary count: 3 Destination/Mask Proto 1.1.1.0/24 DIRECT 1.1.1.1/32 DIRECT 2.2.2.0/24 DIRECT Pre Cost Nexthop Interface 00 1.1.1.1 Vlan-interface1 00 127.0.0.1 InLoopBack0 00 2.2.2.1 Vlan-interface2 For a detailed description of the output information, refer to Table 17. display ip routing-table Syntax ip-prefix display ip routing-table ip-prefix ip_prefix_name [ verbose ] View All views