3Com 5500G-EI Command Reference Guide - Page 269

PIM Configuration Commands 269 Table 46 Output description of the display pim bsr command Field Description BSR Boot strap router Priority Priority of BSR Mask Length:30 Length of mask Expires:00:01:55 Expire Time display pim interface Syntax display pim interface [ interface-type interface-number ] View All Views Parameter interface-type: Specifies the interface type. interface-number: Specifies interface number. Description Use the display pim interface to display the PIM configuration information about an interface. Example display pim interface PIM information of VLAN-interface 2: IP address of the interface is 10.10.1.20 PIM is enabled PIM version is 2 PIM mode is Sparse PIM query interval is 30 seconds PIM neighbor limit is 128 PIM neighbor policy is none Total 1 PIM neighbor on interface PIM DR(designated router) is 10.10.1.20 Table 47 Output description of the display pim interface command Field PIM version PIM mode PIM query interval PIM neighbor limit PIM neighbor policy PIM DR Description Version of PIM PIM mode enabled on the interface (DM or SM) Hello packet interval Limit of the PIM neighbors on an interface. No neighbor can be added any more when the limit is reached. Filtering policy of the PIM neighbors on the current interface. Designated router. display pim neighbor Syntax display pim neighbor [ interface interface-type interface-number ]