3Com 5500G-EI Command Reference Guide - Page 497
Description, Example, rmon event, Syntax, Parameter, decides to log and send trap to the NM station.
![]() |
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 497 highlights
RMON Configuration Commands 497 falling-threshold threshold-value2: Falling threshold, ranging from 0 to 2147483647. event-entry2: Event number corresponding to the falling threshold, ranging from 0 to 65535. owner text: Specifies the creator of the alarm. Length of the character string ranges from 1 to 127. Description Use the rmon alarm command to add an entry to the alarm table. Use the undo rmon alarm command to delete an entry from this table. In this way, the alarm event can be triggered in the abnormal situations and then decides to log and send trap to the NM station. Example Delete the information of entry 15 from the alarm table. system-view System View: return to User View with Ctrl+Z. [SW5500]undo rmon alarm 15 rmon event Syntax rmon event event-entry [ description string ] { log | trap trap-community | log-trap log-trapcommunity | none } [ owner rmon-station ] undo rmon event event-entry View System view Parameter event-entry: Number of the entry to be added/deleted, ranging from 1 to 65535. description string: Event description. Length of the character string ranges from 1 to 127. log: Log event. trap: Trap event. trap-community: The community of the Network Management station that the trap message is sent to. log-trap: Log and trap event. log-trapcommunity: The community of the Network Management station that the trap message is sent to. none: neither log nor trap event.
![](/manual_guide/products/3com-5500gei-command-reference-guide-41e7884/497.png)