3Com 5500G-EI Command Reference Guide - Page 152

152 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Parameter ip_prefix_name Enter the ip prefix list name. verbose Enter to display verbose information about both the active and inactive routes that passed filtering rules. Without this parameter, this command displays the summary of active routes that passed filtering rules. Description Use the command display ip routing-table ip-prefix ip_prefix_name to view information on the routes that passed filtering rules for the specified IP prefix name. Use the command display ip routing-table ip-prefix ip_prefix_name verbose to display both the active and inactive routes that passed filtering rules. Without the verbose parameter, this command displays the summary of the active routes that passed filtering rules. Example To display the summary information for ip prefix list abc2, active route only, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]ip ip-prefix abc2 permit 10.1.1.0 24 less-equal 32 [SW5500]display ip routing-table ip-prefix abc2 The information displays in the following format: Routes matched by ip-prefix abc2: Summary count: 2 Destination/Mask Protocol Pre Cost Nexthop 10.1.1.0/24 DIRECT 0 0 10.1.1.2 10.1.1.2/32 DIRECT 0 0 127.0.0.1 Interface Vlan-interface1 InLoopBack0 For a detailed description of the output information, see Table 18. To display the information on the active and inactive routes for prefix list abc2, enter the following: [SW5500]display ip routing-table ip-prefix abc2 verbose The information displays in the following format: Routes matched by ip-prefix abc2: + = Active Route, - = Last Active, # = Both* = Next hop in use Summary count:2 **Destination: 10.1.1.0 Mask: 255.255.255.0 Protocol: #DIRECT Preference: 0 *NextHop: 10.1.1.2 Interface: 10.1.1.2(Vlan-interface1) Vlinkindex: 0 State: Age: 3:23:44 Cost: 0/0 Tag:0 **Destination: 10.1.1.2 Protocol: #DIRECT *NextHop: 127.0.0.1 Mask: 255. 255. 255. 255 Preference: 0 Interface: 127.0.0.1(InLoopBack0)