3Com 5500G-EI Command Reference Guide - Page 256
Parameter, Description, Example, igmp host-join vlan, Syntax, Ethernet Port view
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
256 CHAPTER 7: USING MULTICAST PROTOCOL COMMANDS Parameter group-address: Multicast address of the multicast group that an interface will join. port: Specifies the port in the VLAN interface. Description Use the igmp host-join port command to enable a port in the VLAN interface of an ethernet Switch to join a multicast group. Use the undo igmp host-join port command to disable the configuration. By default, an interface does not join any multicast group. Related command: igmp host-join vlan, igmp host-join and igmp group-policy. Example Add port GigabitEthernet 1/0/1 in VLAN-interface10 to the multicast group at 225.0.0.1. system-view System View: return to User View with Ctrl+Z [SW5500]interface Vlan-interface 10 [SW5500-vlan-interface10]igmp host-join 225.0.0.1 port GigabitEthernet 1/0/1 igmp host-join vlan Syntax igmp host-join group-address vlan vlan_id undo igmp host-join group-address vlan vlan_id View Ethernet Port view Parameter group-address: Multicast address of the multicast group that an interface will join. vlan_id: Specifies the ID for the VLAN to which the port belongs. Description Use igmp host-join vlan command to enable a port in the VLAN interface of a switch to join a multicast group. Use undo igmp host-join vlan command to disable the configuration. By default, a port does not join any multicast group. This command has the same function as the igmp host-join port command. Note that the configured port must belong to the specified VLAN, and the IGMP protocol must be enabled on this VLAN interface; otherwise, the configuration does not function.