3Com 5500G-EI Command Reference Guide - Page 222
display ip ip-prefix, Syntax, Parameter, Description, Example, display route-policy
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
222 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS system-view System View: return to User View with Ctrl+Z. [SW5500]route-policy permit node 1 % New sequence of this list [SW5500-route-policy]apply tag 100 display ip ip-prefix Syntax display ip ip-prefix [ ip_prefix_name ] View All Views Parameter ip_prefix_name Enter displayed address prefix list name. Description Use the display ip ip-prefix command to view the address prefix list. Related command: ip ip-prefix. Example Display the information of the address prefix list named to p1. display ip ip-prefix p1 name index conditions ip-prefix / mask p1 10 permit 10.1.0.0/16 GE LE 17 18 Table 39 Output Description of the display ip-ip prefix Command Field name index conditions ip-prefix GE LE Description Name of ip-prefix Internal sequence number of ip-prefix Mode: permit or deny Address and network segment length of ip-prefix Greater-equal value of ip-prefix network segment length Less-equal value of ip-prefix network segment length display route-policy Syntax display route-policy [ route_policy_name ] View All Views Parameter route_policy_name Specify displayed Route-policy name. Description Use the display route-policy command to view the configured Route-policy Related command: route-policy.