3Com 5500G-EI Command Reference Guide - Page 75
Description, Example, lacp system-priority, Syntax, Parameter, link-aggregation group, agg-id
![]() |
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Ethernet Port Link Aggregation Commands 75 Description Use the lacp port priority command to configure port priority value. Use the undo lacp port-priority command to restore the default value. Related commands: display link-aggregation verbose and display link-aggregation interface. Example To set port priority as 64, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]lacp port-priority 64 lacp system-priority Syntax lacp system-priority system-priority-value undo lacp system-priority View System View Parameter system-priority-value: System priority, ranging from 0 to 65535. By default, it is 32768. Description Use the lacp system-priority command to configure system priority value. Use the undo lacp system-priority command to restore the default value. Related command: display lacp system-id. Example To set system priority as 64, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]lacp system-priority 64 link-aggregation group Syntax agg-id description link-aggregation group agg_id description alname undo link-aggregation group agg-id description View System View Parameter agg_id: Aggregation group ID, in the range of 1 to 464.
![](/manual_guide/products/3com-5500gei-command-reference-guide-41e7884/75.png)