3Com 5500G-EI Command Reference Guide - Page 314
Description, Example, snmp-agent usm-user, Syntax
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
314 CHAPTER 8: USING QOS/ACL COMMANDS v2c: V2c security mode. v3: V3 security mode. groupname: Group name, ranging from 1 to 32 bytes. authentication: If this parameter is added to configuration command, the system will authenticate but not encrypt SNMP data packets. privacy: Authenticates and encrypts the packets. read-view: Sets read-only view. read-view: Read-only view name, ranging from 1 to 32 bytes. write-view: Sets read-write view. write-view: Read-write view name, ranging from 1 to 32 bytes. notify-view: Sets notify view. notify-view: Notify view name, ranging from 1 to 32 bytes. acl acl-number: the number identifier of basic number-based ACLs, ranging from 2000 to 2999 Description Using the snmp-agent group command, you can configure a new SNMP group and reference the ACL to perform ACL control to the network management users by acl acl-number. Using the undo snmp-agent group command, you can remove a specified SNMP group. Example Creates a new SNMP group: MyCompany, and reference the ACL 2001 to perform ACL control to the network management users (basic ACL 2001 has already been defined). system-view System View: return to User View with Ctrl+Z [SW5500]snmp-agent group v1 MyCompany acl 2001 snmp-agent usm-user Syntax snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number ] undo snmp-agent usm-user { v1 | v2c } user-name group-name snmp-agent usm-user v3 user-name group-name [ authentication-mode { md5 | sha } auth-password ] [ acl acl-number ] undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string } View System View