3Com 5500G-EI Command Reference Guide - Page 308
qos-profile, Syntax, Parameter, Description, Example, qos-profile user-based
![]() |
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
308 CHAPTER 8: USING QOS/ACL COMMANDS qos-profile Syntax qos-profile profile-name undo qos-profile profile-name View System View Parameter profile-name: QoS profile name, a string of one to 32 characters, starting with letters [a-z, A-Z] and excluding all, interface, and user which are reserved as keywords. Description Use the qos-profile command to create a QoS profile and enter the corresponding view. For an existing profile, you can directly enter the corresponding view. Use the undo qos-profile command to delete a QoS profile. You cannot delete the specific QoS profile which has been applied to the port. Example To create QoS profile student, enter the following: system-view System View: return to User View with Ctrl+Z [SW5500] qos-profile student [SW5500-qos-profilestudent] qos-profile user-based Syntax qos-profile user-based undo qos-profile user-based View Ethernet Port View Parameter None Description Use the qos-profile user-based command to configure application mode on the port of the QoS profile. Use the undo qos-profile user-based command to restore the default (port-based) application mode. By default, port-based application mode is selected on the port.
![](/manual_guide/products/3com-5500gei-command-reference-guide-41e7884/308.png)