3Com 5500G-EI Command Reference Guide - Page 362

362 CHAPTER 11: USING AAA AND RADIUS COMMANDS View All views Parameter access-type { dot1x | mac-authentication }: Configures to display the supplicants according to their logon type. dot1x means the 802.1x users. mac-authentication means the centralized mac address authentication users. domain domain-name: Configures to display all the users in an ISP domain. domain-name specifies the ISP domain name with a character string not exceeding 24 characters. The specified ISP domain shall have been created. mac mac-address: Configures to display the supplicant whose MAC address is mac-address. The argument mac-address is in the hexadecimal format (H-H-H). radius-scheme radius-scheme-name: Configures to display the supplicant according to RADIUS server name. radius-scheme-name specifies the RADIUS server name with a character string not exceeding 32 characters. interface interface-type interface-number: Configures to display the supplicant according the port. ip ip-address: Configures to display the user specified with IP address. The argument ipt-address is in the hexadecimal format (ip-address). vlan vlanid: Configures to display the user specified with VLAN ID. Here, vlanid ranges from 1 to 4094. ucibindex ucib-index: Configures to display the user specified with ucib-index. Here, ucib-index ranges from 0 to 4095. user-name user-name: Configures to display a user specifies with user-name. user-name is the argument specifying the username. It is a character string not exceeding 32 characters, excluding and ">". The @ character can only be used once in one username. The pure username (the part before @, namely the user ID) cannot exceed 24 characters. Description Use the display connection command to view the relevant information of all the supplicants or the specified one(s). The output can help you with the user connection diagnosis and troubleshooting. If no parameter is specified, this command displays the related information about all connected users Related command: cut connection. Example To display the relevant information of all the users, enter the following: display connection Total 0 connections matched ,0 listed.