Behringer DEEPMIND 12D Manual - Page 102
ChorusVerb CHORUS & REVERB, DelayVerb DELAY & REVERB
View all Behringer DEEPMIND 12D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
102 DeepMind 12D User Manual ChorusVerb (CHORUS & REVERB) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1* SPD Speed Hz 0.0 Hz 4.0 Hz Adjusts the rate of the chorus. Time synchronised options from 4 to 1/64 bars. 2* DEP Depth % 0.0% 100% Adjusts the modulation depth of the chorus. 3 DLY Delay ms 0.5 ms 50.0 ms Adjusts the delay of the chorus. 4* PHS Phase - 0.0 180.0 Offsets the phase between the left and right channels. 5 WAV Wave % 0.0% 100% Adjusts the LFO waveform from a sine wave to triangular wave. 6* BAL Balance - -100.0 100.0 Adjusts the balance between chorus and reverb. 7 PRE PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal. 8* DCY Decay s 0.1 s 5.0 s Controls the amount of time it takes for the reverb to dissipate. 9 SIZ Size - 2.0 200.0 Controls how large or small the simulated space is. 10* DMP Damping Hz 1000 Hz 20000 Hz Determines the decay of high frequencies within the reverb tail. 11* LC LoCut Hz 10.0 Hz 500.0 Hz Excludes low frequencies below the value. 12* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. * These parameters are available as modulation destinations in the Modulation Matrix DelayVerb (DELAY & REVERB) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1 TIM Time ms 1.0ms 1500.0ms Adjusts the delay time for the left channel delay. Time sync options from 4 to 1/64 bars. 2 PAT Pattern - 1/4 1X Sets the delay ratio for the right channel delay. 3* FHC FeedHC Hz 200.0 Hz 20000.0 Hz Trims high frequencies from the feedback. 4* FBK Feedback % 0.0% 100% Controls the percentage of feedback. 5* XFD X-Feed % 0.0% 100% Control the amount of delay sound sent to the reverb effect. 6* BAL Balance - -100.0 100.0 Adjusts the ratio between delay and reverb. 7 PRE PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal. 8* DCY Decay s 0.1 s 5.0 s Controls the amount of time it takes for the reverb to dissipate. 9 SIZ Size - 2.0 200.0 Controls how large or small the simulated space is. 10* DMP Damping Hz 1000 Hz 20000 Hz Determines the decay of high frequencies within the reverb tail. 11* LC LoCut Hz 10.0 Hz 500.0 Hz Excludes low frequencies below the value. 12* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. * These parameters are available as modulation destinations in the Modulation Matrix