Behringer DEEPMIND 12D Manual - Page 79
Vcf Res Fader
View all Behringer DEEPMIND 12D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
79 DeepMind 12D User Manual The diagram below shows the results from high, medium and low settings of the cut-off frequency when applied to the SAWTOOTH and SQUARE waveforms. VCF FREQUENCY SAWTOOTH SQUARE HIGH 8.5.2 VCF RES FADER LEVEL (dB) FREQUENCY (Hz) LEVEL (dB) -3 dB MED LEVEL (dB) FREQUENCY (Hz) -3 dB LOW FREQUENCY (Hz) The VCF FREQ range is from 50.0 Hz to 20000.0 Hz. The default VCF FREQUENCY setting is 20000.0 Hz (fully open). The fader position, current value and stored value for the VCF FREQ fader is shown on the PROG screen. There is also a visualization of the filter curve as shown below. Note: The slope of the filter will update depending on the use of a 2-pole or 4-pole configuration. • The VCF RES fader controls the resonance of the filter. When resonance is increased, the frequencies/harmonics/partials around the cut-off frequency are emphasized. The resonance along with the filter slope help define the character of the filter. The DeepMind 12D filter is capable of being driven into self oscillation. Unlike many other synthesizers, the DeepMind 12D can guarantee an accurate pitch even when the filter resonance is pushed to (and past) the point where the filter starts to self-oscillate. When using this self-oscillating feature of the VCF as a sound source, the VCF calibration ensures the correct response when playing the entire scale of the keyboard. For more information please consult the section on calibration later in this document. VCF RESONANCE SAWTOOTH SQUARE LOW LEVEL (dB) FREQUENCY (Hz) LEVEL (dB) MED FREQUENCY (Hz) LEVEL (dB) HIGH FREQUENCY (Hz) The VCF RES range is from 0.0% to 100.0%. The default VCF RES setting is 0.0%. The fader position, current value and stored value for the VCF RES fader is shown on the PROG screen. There is also a visualization of the resonance as shown below: