Behringer DEEPMIND 12D Manual - Page 109
T-RayDelay TEL-RAY DELAY, DecimDelay Decimator Delay
View all Behringer DEEPMIND 12D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
109 DeepMind 12D User Manual T-RayDelay (TEL-RAY DELAY) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 2* DLY Delay % 0.0% 100% Adjusts the master delay time. 3* SUS Sustain % 0.0% 100% Controls how long the delay is sustained for. Warning at 100% build up will occur. 4* WOB Wobble % 0.0% 100% Adjusts the amount of wobble caused by age and quality of build/materials. 5* TON Tone % 0.0% 100% Controls the tone of the delays. * These parameters are available as modulation destinations in the Modulation Matrix DecimDelay (Decimator Delay) No DM12 REF PARAMETERS UNITS MIN MAX DESCRIPTION 1* MIX Mix % 0.00% 100.00% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 2 TIM Time Ms 1.0 ms 1500.0 ms Adjusts the master delay time. Time synchronized options from 4 to 1/64 bars. 3* DSM Downsample % 0.00% 100.00% Decimates the signal by reducing the sampling frequency. 4 FCL FactorL -- - Sets left delay to rhythmic fractions of the master delay (1/4, 3/8, 1/2, 2/3, 1, 4/3, 3/2, 2, 3). 5 FCR FactorR -- - Sets right delay to rhythmic fractions of the master delay (1/4, 3/8, 1/2, 2/3, 1, 4/3, 3/2, 2, 3). 6 BRC Bit-Reduce - 24 1 Decimates the signal by reducing the bit-depth. 7* FC Cutoff Hz 30.0 Hz 20000.0 Hz Adjust the cutoff frequency of the filter, allowing specific frequencies to be affected by the delay. 8* RES Resonance % 0.00% 100.00% Adjusts the resonance of the filter. 9 FLT Type -- - It sets the filter type (Lowpass, Highpass, Bandpass, Notch). 10* FBL FeedL % 0.00% 100.00% Controls the amount of feedback for the left channel. 11* FBR FeedR % 0.00% 100.00% Controls the amount of feedback for the right channel. 12 DMT Decimate -- - It sets the decimation on the input signal (PRE) or only on the delay (POST). * These parameters are available as modulation destinations in the Modulation Matrix