Behringer DEEPMIND 12D Manual - Page 16

16 DeepMind 12D User Manual 5.4 Portamento 5.7 Sustain Input (Rear Panel) • The sustain input is a ¼" TS jack that allows you to connect a sustain pedal, such as a normally-open switch. • The sustain input can be assigned to operate in one of ten modes. For more information please consult the PEDAL SETTINGS section later in this document. • The operation of this pedal can be customized using the GLOBAL / PEDAL SETTINGS menu. • The PORTAMENTO function makes the pitch of a note glide up or down from the previously played note. The PORTAMENTO knob controls the time taken to transition from the previous note to the currently played note. • For more detail on controlling advanced parameters relating to the sustain input please consult the section later in this manual. 5.8 Slide Fader Operation Modes • The knob ranges from 0 seconds (instant change of note, with no pitch gliding) to 10 seconds. • The PORTAMENTO function can be tuned to your specific playing requirements by way of 14 different modes. • The PORTAMENTO function can also be balanced between the OSCs, allowing you to set the ratio of PORTAMENTO applied to OSC 1 and OSC 2. • For more detail on controlling advanced parameters relating to PORTAMENTO please consult the section later in this manual. The PORTAMENTO options are available in the POLY EDIT menu, PITCH PARAMETERS page. • The slide faders can operate in two modes: PASS-THRU or JUMP. 5.5 Volume • For more detail on controlling the way the slide faders respond when adjusted, please consult the section later in this manual. Note: You can also turn off the fader LOCAL messages allowing you to control an external device, without affecting the DeepMind 12D. • The volume knob controls the output level for both the main outputs and the headphones simultaneously. If you find the need to compensate the main output level, please do so using your gain stage on your mixer, audio interface or amplifier. 5.6 Pedal Input (Rear Panel) • The pedal input is a 1/4" TRS jack that allows you to connect an expression pedal. • The pedal input can be assigned to operate in one of seven modes: FOOT CONTROL, MOD WHEEL, BREATH, VOLUME, EXPRESSION, PORTA TIME, and AFTERTOUCH. • The operation of this pedal can be customized using the GLOBAL / PEDAL SETTINGS menu. • For more detail on controlling advanced parameters relating to the pedal input please consult the section later in this manual.