Bernina 830LE Manual - Page 115

BERNINA Dual Feed BERNINA Dual Feed Description Only use «D» presser feet with cut-out at the center back. If an incorrect presser foot is attached, the sewing computer will not start with the dual feed engaged. An error message will appear. With the BERNINA Dual Feed the top and bottom layer of fabric are fed simultaneously, the even feeding enabling perfect matching of striped and checkered patterns. Presser Feet Selection ► Reverse pattern foot 1D (standard accessory) ► Zipper foot 4D (standard accessory) More «D» presser feet are listed in the enclosed accessories catalogue. Switching On BERNINA Dual Feed ► raise the presser foot ► press dual feed down until it engages Switching Off BERNINA Dual Feed ► raise the presser foot ► hold dual feed on black holder with two fingers, pull it down, then push backward, slowly letting it slide upward 115