Bernina 830LE Manual - Page 37
Needle Stop Adjustment, Automatic Thread Cutter and Securing, Stitches, Presser foot position when
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setup Program 7 8 9 1 2 3 4 Needle Stop Adjustment ► if the automatic thread cutter and the «raise presser foot» function are switched off when securing, the needle stop position 7 can be selected ► standard = sewing computer stops with the needle up while the presser foot stays down after securing ► touch «Needle down» icon ► the sewing computer stops with the needle down, the presser foot is raised Automatic Thread Cutter and Securing Stitches ► the number and type of securing stitches before the thread is cut can be programmed ► touch function 8 for securing stitches in place or function 9 for forward securing stitches ► two to six securing stitches can be programmed ► standard = no securing stitches programmed Presser foot position when needle stop down ► with activated icon 1, the presser foot remains down when the sewing computer stops ► with activated icon 2, the presser foot is raised enough to pivot the fabric (hover position) ► with activated icon 3, the presser foot is raised into its highest position Hover position of presser foot ► the stitch width and stitch length multi-function knobs can be used to set the clearance from 0mm to 7mm in maximum (standard clearance is 2 mm) ► the set value, i.e. the clearance between the fabric and the presser foot, is displayed in icon 4 37