Bernina 830LE Manual - Page 124
Hooping the Fabric
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Preparation Hooping the Fabric ABC Centering ► determine the center of the fabric to be embroidered ► mark with a fabric marker or chalk Using the Embroidery Hoop ► loosen the screw(s) ► remove the inner hoop ► the arrows on both hoops must match ► the arrows on the large and medium hoops and on the Mega Hoop are at the center front, on the small hoop, they are to the right side Embroidery Template ► there is an embroidery template for each hoop ► the embroidery area is marked in 3/8" (1cm) squares ► the center and end point holes of the center lines are with holes for transferring marks to the fabric ► place the template in the inner hoop, so the BERNINA logo is at the front edge (by the arrows) and can be read ► placed in this way, the template sits automatically in the inner hoop ► the finger hole or the template holder make it easier to remove the template from the hoop Hooping the fabric ► place the fabric on the outer hoop; line up the marked center point on the center of the template ► place the fabric and inner hoop on the outer hoop ► match the arrows of both hoops ► fit hoops into each other; ensure that the fabric does not move ► hoop the material to be embroidered tightly, tighten the screw ► remove the template 124