Bernina 830LE Manual - Page 19

Preparation Double/Triple Needle A A Double Needle ► touch the Security Program icon ► touch the appropriate needle icon (double needle) in the Security Program screen ► place a thread spool on the center spool pin and one on the rear spool pin and thread the corresponding guides on the telescopic rod ► guide the thread from the rear spool pin into the threading slit and the rear of the tension disc A. Insert thread into the thread guide of the needle clamp ► guide the thread from the center spool pin into the threading slit and in front of the tension disc A. Insert thread into the thread guide of the needle clamp ► join both threads in one hand and guide them both in the defined groove of the thread holder and pull them back to front over the thread cutter, cutting both threads ► touch the icon «Manual Threading» on the threading animation screen. Next touch the illuminated automatic threading button ► using the manual threader in your accessory kit, manually thread the left needle and then the right needle Triple Needle ► in the Security Program select triple needle ► place a thread spool on each spool pin and thread the respective guides on the telescopic rod ► thread as usual, guiding the thread from the rear and center spool pin in the threading slit to the rear of thread tension disc A and the thread from the front spool pin in front of the tension disc A Changing the thread ► cut the spool thread before the pre-tension and pull out of the sewing computer to front near the needle 19