Bernina 830LE Manual - Page 148
Properties
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Embroidery Motifs Properties 1 Fill Stitch Type ► change the stitch type ► change the stitch density ► the basic setting of the step stitch (fill stitch) is activated by touching the icon «Change Stitch Type» If the motif is enlarged substantially, long satin stitches occur, tunneling the fabric. In this case, it is recommended to switch to the step stitch fill. The embroidery motifs are filled with satin or step stitches. Satin Stitch ► the needle swings from one side to the other (tight zigzag) Step Stitch (Fill Stitch) ► the needle stitches in straight rows at regular intervals (straight-stitching) ► touch the icon «Change Stitch Type» ► the satin stitch fill changes to a maximum of 8mm long step stitches fill (basic setting) ► touch the «+ /-» icon or turn the stitch width knob clockwise/counterclockwise and the maximum step stitch length is increased/decreased ► the maximum stitch length is 12.7mm ► touch , the selected step stitch length is saved and the Edit screen appears ► touch the «Reset» icon, basic setting (8mm) is activated ► to fill the motif with satin stitches again, touch the «Change Stitch Type» icon again 148