Bernina 830LE Manual - Page 12
Power Switch / Power Cable, Free-Hand-System FHS Presser Foot Lifter
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Preparation Power Switch / Power Cable A Power Switch The sewing computer is switched on («I») and off («0») with the power switch. I the sewing computer is switched on 0 the sewing computer is switched off B Power connection C Foot control connection D PC connection E USB stick connection If the sewing computer is kept in a cold room, place it in a warm room for 1 hour before use. E D C A B (USA/Canada only): The sewing computer has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way! Free-Hand-System (FHS) Presser Foot Lifter The FHS is used to raise and lower the Presser Foot. Attaching the Free Hand System ► insert into the opening; you should be able to operate the FHS with your knee in your normal sitting position Raising and Lowering the Presser Foot ► with knee push FHS to the right ► the presser foot is raised and the feed-dog is lowered simultaneously. Tension is released ► the feed-dog is raised as soon as the first stitch is sewn Your dealer can adjust the FHS if necessary. 12