Bernina 830LE Manual - Page 159

Embroidery Support Embroidery Sequence Control when Thread Breaks ► a special screen opens ► motif appears in original size on the left-hand side of the screen and in an enlarged view on the right ► this makes it easier to check the embroidery sequence ► the information area for operating the stitch width and stitch length knobs is displayed ► turn knobs counterclockwise (or clockwise, the hoop is moved backwards (or forwards) in the embroidery sequence ► turn stitch width knob slowly, hoop is moved stitch by stitch ► turn stitch length knob, hoop is moved in large steps (approx. 50 steps) ► the number in the information area shows the number of stitches in the embroidery sequence ► use the «0-9» field to go directly to a stitching position ► position the needle back far enough so that it will resume stitching several stitches before the thread breakage ► to return to original position, touch information area ► touch to close the special screen Resuming Embroidering ► to continue embroidering, touch the start-stop-button or press the foot control 159