Bernina 830LE Manual - Page 29

Overview Presser Foot Position ► touch the button = the presser foot is lowered and raised slightly again so the fabric can be easily positioned. When sewing starts the foot is lowered on to the material ► touch the button again = the presser foot is raised and the Feed-dog is simultaneously lowered Automatic Securing Program ► touch the button before the sewing starts or during sewing = single patterns are secured at the end, with the selected number of stitches programmed ► touch the button before starting a combination = the first pattern is secured at the end, with the number of stitches programmed ► touch the button while stitching a combination = the active pattern is secured at the end, with the number of stitches programmed ► the sewing computer stops automatically after all securing variations ► the number and type of the securing stitches can be programmed in the setup program Slide Speed Control ► the motor speed is infinitely variable with the slide Altering Needle Positions ► touch left button - the needle moves to the left ► touch right button - the needle moves to the right ► quick change - hold the button down ► total of 11 needle positions (5 left, 5 right, 1 center) Stitch Width/Length (Multifunction) Knobs ► to adjust stitch width or length ► to alter thread tension ► to alter presser foot pressure ► to adjust the sewing direction when in «directional sewing» ► to adjust button size or the slit size of the buttonhole ► to adjust the balance 29