Bernina 830LE Manual - Page 15
Preparation
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparation Winding the Bobbin 1 4 5 2 3 Preparation ► turn power switch on (to «I») ► place empty bobbin on Pin, white mark in front ► the bobbin winding screen appears ► the amount of bobbin fill is recognized by the system and displayed by bar below the selectable bobbin fill ► place thread spool on the front spool pin and thread the respective guides 1 on the telescope Winding the Bobbin ► hold thread with both hands, guide the thread in the thread guide on the swivel plate 2 in the direction of the arrows and around the bobbin pre-tension 3 ► wind the thread one to two times around the empty bobbin 4 following the direction of the arrows and pull any excess thread in the direction of the arrows, cut off on the thread cutter 5 ► select the bobbin filling, standard = 100% ► «Start» field = touch bobbin symbol ► adjust the winding speed with the «+» or «-» icon or with the stitch width knob ► winding process stops as soon as the selected fill percentage is reached ► remove the bobbin and pull the thread over the thread cutter ► the screen is closed Interrupting the winding process ► the winding process can be interrupted by touching the icon, and the screen can be closed by touching the icon ► Continuing the winding process ‣ touch ‣ touch , the screen for winding appears ‣ touch to start winding process It is possible to wind the bobbin while embroidering. We recommend to reducing the winding speed. 15