Bosch NBN-498-11P Operation Manual - Page 102

Relay name, Trigger relay, LIVE Serial port function, Transparent, Terminal, Camera ID, Baud

Get Bosch NBN-498-11P PDF manuals and user guides View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

102 en | Advanced Mode Dinion2X IP Camera Relay name The relay can be assigned a name here. The name is shown on the button next to Trigger relay. The LIVEPAGE can also be configured to display the name next to the relay icon. Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). 9.9.3 COM1 Configure the data connector for the camera. Serial port function Select a controllable unit from the list. If you wish to use the serial port to transmit transparent data, select Transparent. Select Terminal if you wish to operate the unit from a terminal. After selecting a unit, the remaining parameters in the window are set automatically and should not be changed. Camera ID If necessary, enter the ID of the peripheral you wish to control (for example a dome camera or pan/tilt head). Baud rate Select the value for the transmission rate in bps. Data bits The number of data bits per character cannot be changed. Stop bits Select the number of stop bits per character. Parity check Select the type of parity check. Interface mode Select the desired protocol for the serial interface. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
102
en | Advanced Mode
Dinion2X IP Camera
AR18-10-B006 | v1.1 | 2010.06
Installation and Operation Manual
Bosch Security Systems
Relay name
The relay can be assigned a name here. The name is shown on
the button next to
Trigger relay
. The
LIVEPAGE
can also be
configured to display the name next to the relay icon.
Trigger relay
Click the button to switch the relay manually (for example, for
testing purposes or to operate a door opener).
9.9.3
COM1
Configure the data connector for the camera.
Serial port function
Select a controllable unit from the list. If you wish to use the
serial port to transmit transparent data, select
Transparent
.
Select
Terminal
if you wish to operate the unit from a terminal.
After selecting a unit, the remaining parameters in the window
are set automatically and should not be changed.
Camera ID
If necessary, enter the ID of the peripheral you wish to control
(for example a dome camera or pan/tilt head).
Baud rate
Select the value for the transmission rate in bps.
Data bits
The number of data bits per character cannot be changed.
Stop bits
Select the number of stop bits per character.
Parity check
Select the type of parity check.
Interface mode
Select the desired protocol for the serial interface.