Bosch NBN-498-11P Operation Manual - Page 44
Establishing the connection, Protected network
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
44 en | Browser connection Dinion2X IP Camera 7.2 Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP address of the camera as the URL. Note: If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 7.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels. If the camera is password-protected, a message to enter the password appears. 1. Enter the user name and the associated password in the appropriate fields. 2. Click OK. If the password is correct, the desired page is displayed. 7.3 Protected network If a Radius server is used for network access control (802.1x authentication), the camera must be configured first. To configure the camera for a Radius network, connect it directly to a PC via a crossed network cable and configure the two parameters, Identity and Password. Only after these have been configured can communication with the camera via the network occur. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/44.png)