Bosch NBN-498-11P Operation Manual - Page 38
Camera set-up
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 en | Camera set-up Dinion2X IP Camera 6 Camera set-up The camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out remotely via the network using a web browser. However, the camera also has a set-up menu in which basic installation settings (lens wizard, IP address) can be accessed. To view this menu, connect a monitor to the composite video output of the camera. 6.1 Camera menu navigation Five keys are used for navigating through menu system. Up key Menu/Select key (center) Right key Figure 6.1 Navigation Down key Left key - To open the install menu and enable the analog video output, press and hold the center key for approximately two seconds. This turns off the IP video stream. - Use the up or down keys to scroll through a menu. - Use the left or right keys to move through options or to set parameters. - When in a menu, quickly double-press the menu/select key to restore the selected item to its factory default. - To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item. (This turns the IP video stream back on.) Some menus automatically close after about two minutes; other menus have to be closed manually. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/38.png)