Bosch NBN-498-11P Operation Manual - Page 116
Recording video sequences, Running recording program, Audio communication
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
116 en | Operation via the browser Dinion2X IP Camera 10.1.7 - Click the camera icon to save single images. The storage location depends on the configuration of the camera. Recording video sequences Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The sequences are recorded at the resolution specified in the encoder configuration. The storage location depends on the configuration of the camera. 1. Click the recording icon to record video sequences. - Saving begins immediately. The red dot on the icon indicates that a recording is in progress. 2. Click the recording icon again to stop recording. 10.1.8 10.1.9 Play back saved video sequences using the Player from Bosch Security Systems. Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording. The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed. Audio communication Audio can be sent and received via the Livepage if the active monitor and the remote station of the camera support audio. 1. Press and hold the F12 key to send an audio signal to the camera. 2. Release the key to stop sending audio. All connected users receive audio signals sent from the camera but only the user who first pressed the F12 key can send audio signals; others must wait for the first user to release the key. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/116.png)