Bosch NBN-498-11P Operation Manual - Page 120
Resolving problems
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
120 en | Troubleshooting Dinion2X IP Camera 11.2 Resolving problems The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution No image transmission to remote location. Defective camera. Connect a local monitor to the camera and check the camera function. Faulty cable connections. Check all cables, plugs, contacts and connections. Incorrect encoder stream property set for connection to hardware decoder. Select the H.264 BP+ (HW decoder) option on the Encoder Streams configuration page. No connection The unit's configuration. established, no image transmission. Faulty installation. Check all configuration parameters. Check all cables, plugs, contacts and connections. Wrong IP address. Check the IP addresses (terminal program). Faulty data transmission within the LAN. The maximum number of connections has been reached. Check the data transmission with ping. Wait until there is a free connection and call the transmitter again. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems