Bosch NBN-498-11P Operation Manual - Page 73
Enhance
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Dinion2X IP Camera Advanced Mode | en 73 A low (negative) value means that the camera switches to monochrome at a lower light level. A high (positive) value means that the camera switches to monochrome at a higher light level. Priority In Auto switching mode, set the camera priority to either: - Color: the camera gives color pictures as long as the light level permits. - Motion: the camera gives sharp images without motion blur as long as the light level permits (it switches to monochrome earlier than it would with Color priority). The camera recognizes IR-illuminated scenes to prevent unwanted switching to color mode. IR contrast There are two modes for IR contrast: - Enhanced: the camera optimizes contrast in applications with high IR illumination levels. Select this mode for IR (730 to 940 nm) light sources and for scenes with grass and green foliage. - Normal: the camera optimizes contrast in mono applications with visible light illumination. Color burst - Off: the color burst in the video signal is switched Off in monochrome mode. - On: the color burst remains active even in monochrome mode (required by some DVRs and IP encoders). 9.6.5 Enhance Dynamic engine - Off: turns off all automatic scene detail and enhancements (only recommendedfor testing). - XF Dynamic: extra internal processing is enabled for low- light applications (traffic, etc.). - 2X Dynamic: 2X Dynamic adds dual sensor exposure to the XF Dynamic features. In harsh lighting conditions pixels Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06