Bosch NBN-498-11P Operation Manual - Page 56
service, Password, Confirm password, Date format, Device date / Device time
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
56 en | Advanced Mode Dinion2X IP Camera - live is the lowest authorization level. It can only be used to view the live video image and switch between the different live image displays. 9.2.3 Use the various authorization levels to limit access. Proper password protection is only guaranteed if all higher authorization levels are also protected with a password. For example, if a live password is assigned, a service and a user password should also be set. When assigning passwords, always start from the highest authorization level, service, and use different passwords. Password Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password for the selected level. Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. Date/Time Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all devices are operating on the same time. 1. Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week - it is added automatically. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/56.png)