Bosch NBN-498-11P Operation Manual - Page 78

Activating and Configuring Storage Media

Get Bosch NBN-498-11P PDF manuals and user guides View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

78 en | Advanced Mode Dinion2X IP Camera The storage system selected must be available on the network and completely set up. Amongst other things, it must have an IP address and be divided into logical drives (LUN). 1. Enter the IP address of the required iSCSI destination in the iSCSI IP address field. 2. If the iSCSI destination is password protected, enter this into the Password field. 3. Click the Read button. The connection to the IP address is established. The Storage overview field displays the logical drives. Activating and Configuring Storage Media The storage overview displays the available storage media. Select individual media or iSCSI drives and transfer these to the Managed storage media list. Activate the storage media in this list and configure them for storage. Note: Each storage medium can only be associated with one user. If a storage medium is already being used by another user, decouple the user and connect the drive to the camera. Before decoupling, make absolutely sure that the previous user no longer needs the storage medium. 1. In the Storage overview section, double-click the required storage medium, an iSCSI LUN or one of the other available drives. The medium is then added to the Managed storage media list. Newly added media is indicated in the Status column by the status Not active. 2. Click Set to activate all media in the Managed storage media list. These are indicated in the Status column by the status Online. 3. Check the box in the Rec. 1 or Rec. 2 column to specify which data stream should be recorded on the storage media selected. Rec. 1 stores stream 1, Rec. 2 stores stream 2. 4. Check the boxes for the Overwrite older recordings option to specify which older recordings can be AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
78
en | Advanced Mode
Dinion2X IP Camera
AR18-10-B006 | v1.1 | 2010.06
Installation and Operation Manual
Bosch Security Systems
The storage system selected must be available on the network
and completely set up. Amongst other things, it must have an IP
address and be divided into logical drives (LUN).
1.
Enter the IP address of the required iSCSI destination in
the
iSCSI IP address
field.
2.
If the iSCSI destination is password protected, enter this
into the
Password
field.
3.
Click the
Read
button. The connection to the IP address is
established. The
Storage overview
field displays the
logical drives.
Activating and Configuring Storage Media
The storage overview displays the available storage media.
Select individual media or iSCSI drives and transfer these to the
Managed storage media
list. Activate the storage media in this
list and configure them for storage.
Note:
Each storage medium can only be associated with one user. If a
storage medium is already being used by another user,
decouple the user and connect the drive to the camera. Before
decoupling, make absolutely sure that the previous user no
longer needs the storage medium.
1.
In the
Storage overview
section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives. The medium is then added to the
Managed storage media
list. Newly added media is
indicated in the
Status
column by the status
Not active
.
2.
Click
Set
to activate all media in the
Managed storage
media
list. These are indicated in the
Status
column by the
status
Online
.
3.
Check the box in the
Rec. 1
or
Rec. 2
column to specify
which data stream should be recorded on the storage
media selected.
Rec. 1
stores stream 1,
Rec. 2
stores
stream 2.
4.
Check the boxes for the
Overwrite older recordings
option to specify which older recordings can be