Bosch NBN-498-11P Operation Manual - Page 64
ISDN 2B, ISDN 1B, MODEM, Profile Configuration, Profile name, Target data rate, Maximum data rate
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
64 en | Advanced Mode Dinion2X IP Camera - ISDN (2B) CIF resolution for ISDN connections at 100 kbps maximum - ISDN (1B) CIF resolution for ISDN connections at 50 kbps maximum - MODEM CIF resolution for analog modem connections at 22 kbps maximum - GSM CIF resolution for GSM connections Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab. Change the name of a profile and individual parameter values within a profile. Profiles are rather complex. They include a number of parameters that interact with one another, so it is generally best to use the default profiles. Only change a profile if completely familiar with all the configuration options. The parameters as a group constitute a profile and are dependent on one another. If a setting outside the permitted range for a parameter is entered, the nearest valid value is substituted when the settings are saved. Profile name Enter a new name for the profile here. Target data rate To optimize utilization of the bandwidth in the network, limit the data rate for the camera. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion. For complex images or frequent changes of image content due to frequent movements, this limit can temporarily be exceeded up to the value entered in the Maximum data rate field. Maximum data rate This maximum data rate is not exceeded under any circumstances. Depending on the video quality settings for the AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/64.png)