Bosch NBN-498-11P Operation Manual - Page 39
Install menu
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Dinion2X IP Camera Camera set-up | en 39 6.2 Install menu When the Install menu is opened, the MAC address of the unit is shown. This is factory set and cannot be changed. (To ensure that the correct MAC address is displayed, wait 20 seconds after power-up before opening the Install menu.) 6.2.1 The items in the Install menu include the Mode selection, the Lens Wizard submenu, the Network submenu, and the Defaults submenu. Note: Camera parameter set-up is done via IP. See Section 9.6 Camera for the specific camera menus. Pre-defined modes There are six pre-defined modes with settings to make configuration easier. Select one of the six pre-defined modes in the Install/Mode submenu. The modes are defined as follows; 1. 24-hour Default installation mode to provide stable pictures over a 24-hour period. These settings are optimized for out-ofthe-box installation. 2. Traffic Capture high-speed objects using default shutter in variable lighting conditions. 3. Low light Provide extra enhancement, such as AGC and SensUp to make usable pictures in low-light conditions. 4. Smart BLC Settings optimized to capture details in high contrast and extremely bright-dark conditions. 5. Low noise Enhancements are set to reduce picture noise. Useful for conditional refresh DVR and IP storage systems because reducing noise reduces the amount of storage required. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06