Bosch NBN-498-11P Operation Manual - Page 74
Color
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
74 en | Advanced Mode Dinion2X IP Camera from each exposure are mixed to give a more detailed image (use 2X Dynamic when SmartBLC is not required). - Smart BLC: BLC window and weighting factor are automatically defined. Camera dynamically adjusts these for changing light conditions. Includes all the benefits of 2X Dynamic. Auto black Auto black ON automatically increases the visibility of details even when scene contrast is less than full-range due to mist, fog, etc. Sharpness level Adjusts the black level between -15 and +15. Zero position of slider corresponds to the factory default black level. A low (negative) value makes the picture less sharp. Increasing sharpness brings out more detail. Extra sharpness can enhance the details of license plates, facial features and the edges of certain surfaces. Dynamic noise reduction In AUTO mode the camera automatically reduces the noise in the picture. This may cause some motion blur on exceptionally fast moving objects immediately in front of the camera. This can be corrected by widening the field of view or selecting Off. Peak white invert Use Peak white invert to reduce glare from the CRT/LCD display. Use in ANPR/LPR applications to reduce headlight glare. (Test on-site to ensure that it does benefit the application and is not distracting for operators.) 9.6.6 Color White balance - ATW: Auto tracking white balance allows the camera to continually adjust for optimal color reproduction. - AWB hold: Puts ATW on hold and saves the color settings. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/74.png)