Bosch NBN-498-11P Operation Manual - Page 35
Using the camera install menu, Back focus adjustment
![]() |
View all Bosch NBN-498-11P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Dinion2X IP Camera Installation | en 35 5.9 Using the camera install menu Five keys, located behind the side door panel, are used for accessing the camera menu. Bosch Bosch 5.10 To open the install menu press and hold the center key for approximately two seconds. The BNC video output is activated and the Install menu appears on the monitor. Back focus adjustment To optimize picture sharpness in both bright and low-level lighting, adjust the back focus. Use the camera's unique Lens Wizard. This ensures that the object of interest always remains in focus, even when focusing at the maximum lens iris opening (for example, at night). - When back focusing varifocal lenses, adjust to obtain a sharp picture in both wide-angle and tele positions for both far and near focus. - When back focusing zoom lenses, ensure the object of interest remains in focus throughout the entire zoom range of the lens. To adjust back focus: 1. Slide open the door panel at the side of the camera. Bosch 2. Unlock the back focus locking button. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
![](/manual_guide/products/bosch-nbn49811p-operation-manual-26e459b/35.png)