Bosch WTVC5530UC User Guide - Page 25
Additional, options, Series
View all Bosch WTVC5530UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Additional options 800 Series i Additional options can only be set after a drying cycle has been selected. Turn the cycle selector to the desired drying cycle, then select desired options from the LCD menu. Select the option to be changed with the Menu" button. Press the button to move to the next option on the display. The active symbol flashes. The setting for the selected option is displayed on the right hand side of the LCD display. When actively displayed, a setting can be changed with the Select" button. Press the Select" button to display the next possible setting. i Pressing the Menu" button while an option is displayed saves the new setting. i If you don't press any button for 10 seconds, the settings are saved automatically. Symbol Function Sets the delay start time of the dryer (Start in .. hours!) Extra care (more gentle than Delicates") ChildĆproof lock (only effective while the program is running) Settings 0-12 h (0.5 h steps) On/Off On/Off Extra Drying Time User selectable degree of dryness Volume of the end signal and the damp dry signal 0, 1, 2, 3 (0=default, 1=dryer, 3=dryest) Off, medium, maximum Signal Behavior at the End of the Selected Cycle The signal will sound when the cycle is finished to notify the user that the cycle has ended. Wrinkle Block will tumble the load periodically for approximately one hour after the cycle ends. The signal will sound at intervals during Wrinkle Block as a reminder the load is finished. Spin speed optimized 400 drying time coordinates 600 the remaining time 800 displayed for the dryer to 1000 the spin speed at which 1200 the laundry was previously spun in the washing machine Explanation If you have chosen the additional option Extra care", the Delicates" indicator light illuminates. Pressing the Delicates" button cancels the additional option Extra care". This additional option allows you to lock your settings to prevent unintended use of the dryer. To start the dryer when the Safety guard is active: Press and hold the Start/Pause" button for 4 seconds. To unlock this additional option when the dryer is running: Press and hold the Start/Pause" button for 4 seconds. If you have chosen one of the Extra Drying Time values (steps 1 to 3), the symbol Z is displayed. 0 is the standard setting - symbol Z is not displayed. Your dryer outputs different signals for certain events as listed below. Event Signal Enable Signal Short tone Disable Signal Two short tones Start of Cycle Short tone End of Cycle (or during Wrinkle Block) Sequence of short tones Mal-Operation Sequence of long tones Warning of Malfunction Sequence of long tones (maximum volume) To optimize the remaining time display, the spin speed at which the laundry was previously spun in the washing machine can be entered by the user. 25