Bose Lifestyle 48 Series IV Owner's guide - Page 36
Adding audio from your cable or satellite box, Audio IN connectors.
View all Bose Lifestyle 48 Series IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TAB 8 TAB 7 TAB 6 TAB 5 COMPLETE SYSTEM CONNECTIONS Adding audio from your cable or satellite box You need to make this connection regardless of the type of video connection (HDMI for example) you used. This carries the audio from your device to your Bose® system speakers. 1. Check your cable or satellite box connection panel to locate the Audio Out connectors. White TAB 4 TAB 3 TAB 2 English c. If a stereo audio cable is not yet attached, use the cable provided by Bose and connect one end to the Audio Out connector on your box. 3. Locate the Audio IN connectors that are labeled CBL•SAT on the back of the media center. Red 2. Identify the stereo audio cable to use: White Be sure to match the colors on the plugs to the connector colors: red to red (R) and white Red to white (L). a. If a stereo audio cable still connects the box to your TV, refer to "Disconnecting your devices from the TV" on page 25. Proceed to b, below. b. If the cable connected to the box is free at one end (disconnected from the TV), proceed to step 3. 32 These connectors are between the VCR and AUX Audio IN connectors. 4. Insert the free end of the stereo cable into the top two connectors. Be sure to match the colors on the plugs to the connector colors: red to red (R) and white to white (L).