Bose Lifestyle 48 Series IV Owner's guide - Page 48
Setting the remote for cable or satellite, If you need to obtain another IR emitter, contact
View all Bose Lifestyle 48 Series IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
TAB 8 TAB 7 TAB 6 TAB 5 COMPLETE SYSTEM CONNECTIONS 5. On the TV screen, look at the menu item TV Power and see if it shows TV Detected. If so, the sensor is connected and positioned properly on the TV. You can now use the adhesive pad to attach the sensor at that spot. Then move to step 6 below. If you see: • TV Not Detected, the TV sensor is not connected or not positioned properly. Check the connection on the media center, then move the sensor and check for TV Detected on the screen. If you see it, move to step 6. • If repositioning the sensor does not work, you can still use the LIFESTYLE® remote with your TV. Simply use the TV On/Off button, instead of having the TV turn on automatically. 6. Follow the steps in "Setting the remote for cable or satellite" next. Or, press the System or Exit button to dismiss the system menu from your TV screen. Then continue with 12 on page 47 for fine tuning your setup. TAB 4 TAB 3 TAB 2 English Setting the remote for cable or satellite You can use the remote to turn on and make basic selections on your other devices. Most cable or satellite devices can receive IR signals from the LIFESTYLE® remote with no problem. For best results, however, position the IR emitter in front of your device (if it is not already in use for the TV). Note: If you need to obtain another IR emitter, contact Bose. Refer to the address list included in the carton. To control a device connected to CBL•SAT 1. Use the cable or satellite remote to turn on your device. 2. Using the LIFESTYLE® remote control, press the CBL•SAT source button. This selects the device and turns on the system if it was off. 3. Press the System button and move right to the Remote Control icon. 4. Press ENTER to move into this menu. 44