Bose Lifestyle 48 Series IV Owner's guide - Page 75

English DEsepuatsñcohl FItralniaçnaois Nederlands Svenska REFERENCE Changing remote control switch settings Each LIFESTYLE® remote control uses a house code that corresponds to the house code set in the media center, enabling the two to communicate. If another LIFESTYLE® system nearby creates a conflict with your system, you can easily set a new house code in your media center and in the remote control(s) by following these steps. Changing the remote control setting 1. Open the remote control battery cover and locate the miniature switches (see page 72). 2. Move one or more of switches 1, 2, 3, or 4 in the opposite direction from its current setting. Use a paper clip, ball point pen, or similar object. Note: DO NOT change any other switch settings. Moving other switches may disable your remote control. 3. Replace the battery cover. 4. Follow the instructions for "Changing the media center setting." If you have additional remote controls, simply follow steps 1-3 above to change the switches to match the switches in the first remote control. Changing the media center 1. Lift the media center door and press the media center All Off button. 2. Press and hold the media center Enter button. Your current house code appears in the media center display window. The four rectangles represent the positions of switches 1 through 4: HOUSE CODE: Switches 1-4 down = 0 0 0 0 (current house code) 3. While holding the Enter button, press any button on the remote control. The media center displays the new house code, which confirms recognition of the new code: NEW HOUSE CODE: (Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code) 4. Release the Enter button. The system remains off. Note: To verify your system's house code, press Enter while the system is off. The settings for switches 1-4 appear on the media center display. 71