Brother International DCP 8040 Service Manual - Page 270
Detailed Description Of Maintenance-mode Functions
UPC - 012502610328
View all Brother International DCP 8040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
CHAPTER 7 MAINTENANCE MODE 3. DETAILED DESCRIPTION OF MAINTENANCE-MODE FUNCTIONS 3.1 EEPROM Parameter Initialization (Maintenance mode 01/91) < Function > The machine initializes the parameters, user switches, and firmware switches registered in the EEPROM, to the initial values. Entering the function code 01 initializes all of the EEPROM areas, but entering 91 does not initialize some areas, as listed below. Function code Data item Maintenance-mode functions User switches Firmware switches Remote activation code Station ID data Outside line number Telephone function registration One-touch dialing Speed dialing Group dialing 01 All of these will be initialized 91 These will be initialized These will not be initialized These will not be initialized NOTE: If you replace the main PCB with one used for any other machine, carry out this procedure and then customize the EEPROM (maintenance-mode function code 74 in Subsection 3.13). < Operating Procedure > (1) Press the 0 and 1 keys (or the 9 and 1 keys according to your need) in this order in the initial stage of the maintenance mode. The "PARAMETER INIT" will appear on the LCD. (2) Upon completion of parameter initialization, the machine returns to the initial stage of the maintenance mode. (3) Be sure to turn the machine power off. If you press the 9 key twice to exit from the maintenance mode without turning the power off, then the machine will not fully initialize the EEPROM. 7-4