Brother International DCP 8040 Service Manual - Page 327
WSW29 Function setting 7
UPC - 012502610328
View all Brother International DCP 8040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
APPENDIX 3 FIRMWARE SWITCHS (WSW) Selector No. 1 | 8 WSW29 (Function setting 7) Function Setting and Specifications Not used. WSW30 (Function setting 8) Selector No. 1 | 3 4 5 6 | 8 Function Not used. Duty cycle control of pulsed current for the heat-fixing unit Drum cleaning prompt settings Not used. Setting and Specifications 0: OFF 0: ON 1: ON 1: OFF NOTE: Selector 4 is applicable to the European version only. l Selector 4: Duty cycle control of pulsed current for the heat-fixing unit Setting this selector to "1" activates the duty cycle control that suppresses the rush current. The duty cycle is 10-ms ON and 20-ms OFF. However, the duty cycle control may emit switching noise to the AC line. Depending upon the codes and regulations in the country, this selector should be set to "0." l Selector 5: Drum cleaning prompt settings Setting this selector to "1" (OFF) deactivates all of the drum cleaning prompt settings enabled by selectors 5 to 7 of WSW42. A-34