Brother International PT-7500 Users Manual - English and Spanish - Page 31
Flag Mode, Flag Len, Frame, Rotate
UPC - 012502620365
View all Brother International PT-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Label Type Modes Flag Mode Labels printed using this Label Type mode can be wrapped around cable or wire with the ends stuck together to form a flag. With the FLAG Label Type mode, each block of text is printed at both ends of separate labels. The length of the unprinted part of this label is equal to the circumference of the cable or wire. In addition, the text can be printed horizontally or rotated 90°. ROTATE set to OFF ROTATE set to ON Flag Flag Flag length diameter length Flag Flag Flag length diameter length After selecting the FLAG Label Type mode, specify the length and diameter of the flag, a frame style if desired, and whether or not to rotate the text. ● FLAG (flag diameter): 0.00" to 4.00" (0.0 to 100.0 mm) Default: 0.25" (7.0 mm) ● FLAG LEN (flag length): 0.40" to 8.00" (10.0 to 200.0 mm) Default: 1.20" (30.0 mm) ● FRAME: OFF, 1 , 2 , 3 , 4 Default: OFF ● ROTATE: OFF, ON Default: OFF ☞ A single block of text can contain a maximum of 7 text lines. ☞ For labels to be attached to cables and wires, we recommend using Flexible ID Tape. To wrap Flexible ID Tape around cylindrical objects, use the FLAG Label Type mode when the diameter of the object is less than 1/8"(3 mm). In addition, the flag length should be at least 3/16" (5 mm). 15