Brother International PT-7500 Users Manual - English and Spanish - Page 92

Problem Label files saved previously are now empty. Cause Have the batteries and AC adapter been disconnected? Is there enough power remaining in the batteries? Have you used the Reset function? Solution All files stored in the internal memory are lost if the batteries and AC adapter are disconnected for longer than two minutes. All data stored in the internal memory is lost if the batteries become empty or the AC adapter is disconnected. The resetting function clears all data stored in the internal memory, including label files. Error Message List Error Message 1 BLOCK LIMIT! 7 LINE LIMIT! 50 LINE LIMIT REACHED! BAR CODE TOO LONG! Cause • This message appears if you try to use the Numbering function when multiple blocks of text have been entered with the PANEL1 Label Type mode selected. • This message appears if 7 lines have already been entered in a text block when you press n. • This message appears if you delete , causing the number of lines in a block to exceed the 7-line limit. • This message appears if 50 lines have already been entered when you press g, then n. • The message appears if the length of the bar code is longer than 8.8" (22 cm) when pressing p. Solution • Cancel the Numbering function. • Limit the number of text blocks to 1. • Limit the number of lines in a text block to 7. • Adjust the number of lines so that the block will not have more than 7 lines. • Limit the number of lines to 50. • Reduce the width of the bar code. 76