Brother International PT-7500 Users Manual - English and Spanish - Page 93

Appendix Error Message BLOCK NO. CHANGE CLEAR TEXT? BUFFER EMPTY! BUFFER FULL! CHECK # OF DIGITS ENTERED! CHECK BATTERIES! CHECK SETTING IN LABEL TYPE MODE! Cause • The message appears when changing from a different Label Type mode to the PANEL2 Label Type mode and the current block number is different from the previously used block number. • This message appears if no text has been typed in when you try to print or Preview function. • This message appears if you try to add a character, a space, a new line, a new block, a symbol, an accented character or a bar code after the maximum number of characters has already been entered. • This message appears if less than the minimum one digit are entered as the bar code data. • This message appears if the required number of digits are not entered in the bar code data. • This message appears if a combination of new and used batteries, a combination of batteries of different types (alkaline and Ni-MH), manufacturers or models, or a combination of recharged and uncharged batteries have been installed. • This message appears if you try to change the settings for the Length function or Frame function after a Label Type mode with a preset label length or frame has already been selected. Solution • Press n to use the PANEL2 Label Type mode. All text is cleared. • Press b to select a different Label Type mode. • Type in some text before trying to perform any of these operations. • Delete some existing text before trying to add any more. • Enter a minimum of one digit before pressing n. • Input the correct number of digits or change the bar code protocol. • Replace the batteries with six new AA batteries of the same type. • If rechargeable batteries are installed, recharge all batteries. • Select a different Label Type mode. 77