Brother International PT-7500 Users Manual - English and Spanish - Page 94

Error Message On 3/4" (18 mm) tape: CHECK THE NUMBER OF LINES! 5 MAX On 1/2" (12 mm) tape: CHECK THE NUMBER OF LINES! 3 MAX On 3/8" (9 mm) and 1/4" (6 mm) tape: CHECK THE NUMBER OF LINES! 2 MAX CHOOSE COPIES LESS THAN 1000! CUTTER ERROR! IMAGE CHARACTER SIZE ERROR! INPUT ABCD AT BEGIN & END! INSERT 1" TAPE INSERT 24mm TAPE Cause • This message appears if you try to print or use the Preview function when the number of lines in the text is greater than the maximum possible for the installed tape. Solution • Reduce the number of lines or install a wider tape. • This message appears if more than 1000 copies were selected with the Print Option functions. • Note the number of copies plus the number of sequential labels cannot exceed 1000. • This message appears if the tape cutter button was pressed when p was pressed or the tape was being fed. • This message appears if a wide user-defined character image is entered when the Vertical Label Type mode is selected. • This message appears if a letter between A and D has not been entered at the beginning and end of the bar code data when the CODABAR protocol is selected. • This message appears if a 1" (24-mm)-wide tape cassette is not installed when printing an Auto Format template created for 1" (24mm)-wide tape. • Select less than 1000 copies. • Release the tape cutter button. If p was pressed, press f to feed out any printed tape. • If the problem cannot be corrected, contact your service representative. • Change the Label Type mode or use a tall userdefined character image. • Enter a letter between A and D at the beginning and end of the bar code data. • Install a 1" (24-mm)-wide tape cassette. 78